Grayscale/Color Resolution; Color Temperature; Convergence - Christie Roadster S+14K-J User Manual

Section 7: Specifications

7.1.6 Grayscale/Color Resolution

Resolution

7.1.7 Color Temperature

White Default CCT
Range of Adjustment
Tracking (deviation from normal over full
range from 10 – 100 IRE)
Stability (during rated lamp life)

7.1.8 Convergence

Convergence zones A, B, C are as defined in Figure 2. Zone A has a diameter ¼ of the image height. Zone B has a diameter
of full image height. All specified convergence errors are between any two colors after a minimum warm-up of 30 minutes.
Convergence is specified with a 1.4-1.8 HD lens (part number 118-100112-01) in the 1.4:1 position with zero offset. Bore-
sight alignment must be adjusted for zero angular error. (Note: convergence error includes the effects of lateral color in the
projection lens. Measurements must be done on horizontal and vertical test pattern lines that intersect the center of the
image).
7-2
10 bits (non-linear) min. (Gamma encoded)
7250K ±950K
3200 K - 9300 K
±500 K max
±500 K max
J Series 2.0, 2.4, and 3.0kW User Manual
020-100707-01 Rev. 1 (10-2011)