Labels And Marking - Christie Roadster S+14K-J User Manual

1 Introduction
Every effort has been made to ensure the information in this document is accurate and reliable; however,
due to constant research the information in this document is subject to change without notice.
USERS/OPERATORS: This manual is intended for trained users operating professional high-brightness
projection systems. Such users may also be trained to replace the lamp and air filter, but cannot install the
projector or perform any service functions on the J Series projector.
SERVICE: Only Christie accredited technicians knowledgeable about all potential hazards associated
with high voltage, ultraviolet exposure and high temperatures generated by the lamp and associated
circuits are authorized to 1) assemble/install the projector and 2) perform service functions inside the
projector.
This manual contains the following sections:
• Section 1 Introduction
• Section 2 Installation and Setup
• Section 3 Operation
• Section 4 Web User Interface
• Section 5 Maintenance
• Section 6 Troubleshooting
• Section 7 Specifications
• Appendix A: Menu Tree
• Appendix B: GPIO
• Appendix C: DMX / ArtNet
1.1

Labels and Marking

Observe and follow any warnings and instructions marked on the projector.
J Series 2.0, 2.4, and 3.0kW User Manual
020-100707-01 Rev. 1 (10-2011)
Indicates a hazardous situation which, if not avoided, will result in death or serious
injury. This signal word is to be limited to the most extreme situations.
Indicates a hazardous situation which, if not avoided, could result in death or serious
injury.
Indicates a hazardous situation which, if not avoided, could result in minor or moderate
injury. It may also be used without the safety alert symbol as an alternative to
"NOTICE".
1-1