Table of Contents
Advertisement
1
Press the <THUMBNAIL> button.
The thumbnail screen appears on the viewfinder screen.
2
Press the <THUMBNAIL MENU> button, and select
[THUMBNAIL] → [SETUP] from the thumbnail menu.
The following screen is displayed.
[INDICATOR]
Select which indicators you want to show on thumbnails and which you want to hide.
[ALL HIDE]
[MARKER]
[TEXT MEMO]
[WIDE]
[PROXY]
[DATA DISPLAY]
Select the time display field of the clip from the time code [TC]/user bits [UB]/shooting time [TIME]/shooting date [DATE]/shooting
date and time [DATE TIME]/clip name [CLIP NAME]/user clip name [USER CLIP NAME]. The factory setting is the time code.
[DATE FORMAT]
Select display order for recording date and time from Y-M-D (Year-Month-Day), M-D-Y (Month-Day-Year), or D-M-Y (Day-Month-
Year).The factory setting may vary depending on the region. (AG-HPX610P: M-D-Y, AG-HPX610EJ: D-M-Y)
This setting is reflected in the recording date and time shown in the clip property and the shooting date and time shown when
[DATE] is selected under the item [DATA DISPLAY].
[THUMBNAIL SIZE]
Select the thumbnail displayed on the screen from either [LARGE] (displaying thumbnail in 3×2) or [NORMAL] (displaying
thumbnail in 4×3). This item is set to [NORMAL] in the factory settings.
[PLAYBACK RESUME]
Select a position to restart playback after stopping playback on the thumbnail screen using the <STOP> button.
[ON]
[OFF]
If the pointer is moved after stopping playback, playback will restart from the beginning of the clip where the pointer is placed
regardless of the setting of the [PLAYBACK RESUME] item. Also, attempting to play back from the end of all the available clips
will cause the screen to flash momentarily, indicating that there are no more clips which can be played back.
[THUMBNAIL INIT]
Return the above thumbnail display settings to the factory settings. Move the cursor to the [THUMBNAIL INIT] item, and press
the <SET> button. Select [YES] when the confirmation screen is displayed.
[EXIT]
Return to the previous menu.
Properties
Clip properties and P2 card status are displayed.
It is possible to edit and rewrite recorded clip metadata while clip properties are displayed.
Clip properties
Select [PROPERTY] → [CLIP PROPERTY] from the thumbnail menu. The following screen appears.
1 Clip number
NOTE
@
t For clips that cannot be played back, the number is displayed
in red.
t When the [EVF TYPE] item on the setting menu [DISPLAY
SETUP] screen is set to [B/W], the [
indicator is displayed.
2 Thumbnail
Chapter 6 Thumbnail Operations for Clips — Thumbnail operations
[ON]
Hides all indicators, [MARKER], [TEXT MEMO], [WIDE], and [PROXY].
[OFF]
According to the following menu, sets show or hide. This setting is the factory setting.
Switches the shot mark indicator between show and hide (on/off). The factory setting is on.
Switches the text memo indicator between show and hide (on/off). The factory setting is on.
Switches the wide indicator between show and hide (on/off). The factory setting is on.
Switches the proxy indicator between show and hide (on/off). The factory setting is on.
Playback starts from the stop position.
Playback starts from the beginning of the clip indicated by the pointer.
1
2
4
] Not playable clip
3
3 Clip information
Displays the indicators added to the clip and the number of text and
voice memos added to the clip.
The [
] mark appears if the clip is recorded on a write-protected P2
card.
NOTE
@
t The camera is not capable of recording or playing back voice
memos.
– 112 –
5
Advertisement
Table of Contents
