Table of Contents
Advertisement
Setup menu list (continued)
TC/UB SETUP screen
Item
TCG
(Camera)
TC PRESET
(Camera)
UB PRESET
(Camera)
EXT TC LINK
(Camera)
92
Display
mode
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
REC RUN:
Sets the initial time code.
YES NO
Sets the user information.
YES NO
Synchronizes the initial time code value during multi-camera shooting. (Slave
camera time codes are synchronized to the master internal TCG value.)
(Page 55)
MASTER: Sets the mode to master mode.
SLAVE:
Sets the mode to slave mode.
When the COUNTER - RESET/TC SET button is pressed, input time
codes are synchronized to the internal TCG.
NO:
Returns to the last screen.
•
Master and slave mode settings are only in effect when this menu is open.
When the menu is closed, EXT TC LINK is automatically canceled.
Description of settings
The time code is advanced only when recording.
indicates the factory setting.
Advertisement
Table of Contents
