Tc/Ub Setup Screen - Panasonic AG-HMC150P Operating Instructions Manual

Memory card camera-recorder
Hide thumbs Also See for AG-HMC150P:
Table of Contents

Advertisement

Setup menu list (continued)

TC/UB SETUP screen

Display
Item
mode
TC MODE
(Camera)
TCG
(Camera)
TC PRESET
(Camera)
UB PRESET
(Camera)
EXT TC LINK
(Camera)
92
Description of settings
Selects the correction mode of the internal time code generator when the time
code of the internal time code generator is recorded.
DF:
Uses the drop frame mode.
NDF:
Uses the non-drop frame mode.
TC MODE is automatically set to NDF when you set recording frame rate of
recording format to 24P.
Sets the mode in which you advance the internal time code generator.
FREE RUN: The time code is advanced regardless of the operation mode.
A slight time error may occur when switching to PB mode if the
frame rate is set to 24P.
REC RUN:
The time code is advanced only when recording.
Sets the initial time code.
YES NO
Set the frame value to 0 or a multiple of 4 when you set recording frame rate
of recording format to 24P. If any other value is set, the recorded time code will
mis-match.
Sets the user information.
YES NO
Synchronizes the initial time code value during multi-camera shooting. (Slave
camera time codes are synchronized to the master internal TCG value.)
(Page 55)
Sets the mode to master mode.
Sets the mode to slave mode.
When the COUNTER - RESET/TC SET button is pressed, input time
codes are synchronized to the internal TCG.
NO:
Returns to the last screen.
Master and slave mode settings are only in effect when this menu is open.
When the menu is closed, EXT TC LINK is automatically canceled.
indicates the factory setting.

Advertisement

Table of Contents
loading

Table of Contents