UPS Setup
The Avaya Line Interactive RM UPS is designed for flexible
configurations and can be installed in a rack, on a wall, or as a
standalone cabinet. Set up the UPS according to the type of installation:
S
S
S
S
If you are using the UPS as a standalone cabinet, continue to "Installing
the UPS" on page 33.
Mounting the UPS in a 19" Rack
To install the UPS in a 19" rack configuration using the supplied
hardware:
1.
2.
t
Avaya
Line Interactive RM UPS Site Preparation, Installation and Operator's Manual
"Mounting the UPS in a 19" Rack" on the following page.
"Mounting the UPS in a 23" Rack" on page 29.
"Zero-U Mounting" on page 30.
"Wall-Mount Setup" on page 32.
Place the UPS on a flat, stable surface with the front of the UPS
facing toward you.
On each side of the UPS, attach the long end of a mounting bracket
to the UPS using four of the M3
Figure 6. Mounting Bracket for a 19" Rack
INSTALLATION
×
6 screws (see Figure 6).
Mounting Bracket
×
M3
6 Bracket Screws
S
164201663 Rev 1
25