Auxiliary Gear Pump Installation - Terex PT-30 Service Manual

Remove
Bolt
Figure 10-4
10. Remove the bolt on the left side of the auxiliary
gear pump.
Remove
Bolt
Figure 10-5
11. Remove the bolt on the right side of the auxiliary
gear pump.
Figure 10-6
12. Remove the auxiliary gear pump by sliding the
lower manifold tube out of the transmission
hose.
10. Transmission and Drive Disassembly and Assembly
Note: It is not necessary to separate the lower manifold
tube from the gear pump: this can be done after the pump
is removed, if necessary.

Auxiliary Gear Pump Installation

Tandem
Pump
Figure 10-7
1. With the lower manifold tube attached to the
auxiliary gear pump, align the mounting bolt
holes in the auxiliary gear pump with the holes in
the tandem pump. It will be necessary to slide
the manifold tube into the transmission hose to
properly position the auxiliary gear pump.
Install
Bolt
Figure 10-8
2. Install the bolt on the right side of the auxiliary
gear pump.
10-3
Compact Track Loader
Auxiliary
Gear
Pump
Trans-
mission
Hose
Lower
Manifold
Tube