Remove
Hoses and
Tubes
Figure 10-11
8. Remove all hoses and tubes from the tandem
pump. Cap the hoses and tubes.
Figure 10-12
9. Remove the mounting bolt (with spring lock
washer and flat washer) from the right-hand side
of the tandem pump.
Remove
Bolt
Figure 10-13
10. Remove the mounting bolt (with spring lock
washer and flat washer) from the left-hand side
of the tandem pump.
10. Transmission and Drive Disassembly and Assembly
Remove
Bolt
10-5
Pump Drive
Coupler
Pump
Mounting
Plate
Figure 10-14
11. Remove the tandem pump (with pump drive
coupler attached) from the pump mounting plate.
Tandem Pump Installation
Pump Drive
Coupler
Flywheel
Gear
Pump
Mounting
Plate
Figure 10-15
1. With the pump drive coupler attached to the tan-
dem pump, position the tandem pump against
the pump mounting plate. Make sure the teeth
on the pump drive coupler mesh properly with
the flywheel gear teeth.
Compact Track Loader