Table of Contents
Advertisement
Kit contents
fi g
02
fi g
03
fi g
04
GDO-11v1 SecuraLift ®
10
GDO-11v1 Multipiece C Rail And Accessory
1 x GDO-11v1 SecuraLift® Ero drive unit (Fig. 02)
1 x TrioCode™ Transmitter pack (Fig. 02)
2 x Door attachment arms (Fig. 02)
1 x Accessory and hardware pack (Fig. 02)
1 x Chain (Fig. 02)
1 x C rail track pack (Fig. 02)
(Pack includes three C rail sleeves and four C rail tracks)
1 x Shuttle assembly (Fig. 02)
1 x Installation Manual
OR
Power Head And Accessory pack
1 x GDO-11v1 SecuraLift® Ero drive unit (Fig. 03)
1 x TrioCode™ Transmitter pack (Fig. 03)
2 x Door attachment arms (Fig. 03)
1 x Accessory and hardware pack (Fig. 03)
1 x Chain (Fig. 03)
1 x Shuttle assembly (Fig. 03)
1 x Installation Manual
PLUS
Pre-Assembled Single Piece C-Rail
Note: The chain or belt in the single piece rail has been
tensioned by the factory.
IMPORTANT NOTE: If modifi cation to the track length
is required, adjustment must be made to the drive end
side only.
Owner Installation Instructions
(Pack includes 1x four button keyring transmitter and
1x two button keyring transmitter with batteries)
(Pack includes 1x four button keyring transmitter and
1x two button keyring transmitter with batteries)
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GDO-11v1 SecuraLift and is the answer not in the manual?
Questions and answers
garage door motor running but wont open or shut after I manually opened during a power black out
My securalift GDO-11v1 door is not working. I manually opened during a power outage. Now I can hear it running but door not moving. Have re engaged the door with the cord
The Automatic Technology GDO-11v1 SecuraLift garage door motor may still be running but not opening or shutting after manual operation during a power blackout due to a residual charge in the batteries. This can cause the opener to become active even when the main power is off.
This answer is automatically generated