Pnp/Pci Configurations; Init Display First; Pnp Os Installed; Reset Configuration Data - VIA Technologies EITX-3000 User Manual

P P/PCI C
N ONFIGURATIONS
Note:
This section covers some very technical items and it is strongly
recommended to leave the default settings as is unless you are
an experienced user.

Init Display First

Settings: [PCI Slot, Onboard, PCIEx]

PNP OS Installed

Settings
No
Yes

Reset Configuration Data

Settings
Disabled
Enabled
Description
BIOS will initialize all the PnP cards
BIOS will only initialize the PnP cards used for booting
(VGA, IDE, SCSI). The rest of the cards will be initialized
by the PnP operating system
Description
Default setting
Resets the ESCD (Extended System Configuration Data)
after exiting BIOS Setup if a newly installed PCI card or
the system configuration prevents the operating system
from loading
69