Pnp/Pci Configurations; Reset Configuration Data; Resources Controlled By - VIA Technologies IB781 User Manual

PNP/PCI Configurations

This option configures the PCI bus system. All PCI bus systems on the
system use INT#, thus all installed PCI cards must be set to this value.
PNP OS Install

Reset Configuration Data

Resources Controlled By

IRQ Resources
DMA Resources
PCI/VGA Palette Snoop
Assign IRQ for VGA
PNP OS Install
Enable the PNP OS Install option if it is supported by the operating
system installed. The default value is No.
Reset Configuration Data
This field allows you to determine whether to reset the configuration
data or not. The default value is Disabled.
Resources Controlled by
This PnP BIOS can configure all of the boot and compatible devices
automatically with the use of a use a PnP operating system such as
Windows 95.
PCI/VGA Palette Snoop
Some non-standard VGA display cards may not show colors properly.
This field allows you to set whether or not MPEG ISA/VESA VGA
cards can work with PCI/VGA. When this field is enabled, a PCI/VGA
can work with an MPEG ISA/VESA VGA card. When this field is
disabled, a PCI/VGA cannot work with an MPEG ISA/VESA card.
Assign IRQ for VGA/USB
By default, this fields are Enabled.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
No
Disabled
Auto(ESCD)
Press Enter
Press Enter
Disabled
Enabled
IB781 User' s Manual
BIOS SETUP
ITEM HELP
Menu Level
Default is Disabled.
Select Enabled to reset
Extended System
Configuration Data
(ESCD) when you exit
Setup if you have
installed a new add-on
and the system
reconfiguration has
caused such a serious
conflict that the OS
cannot boot
41