First/Second/Third Boot Device; Boot Other Device; Boot Up Numlock Status; Typematic Rate Setting - VIA Technologies EITX-3000 User Manual

First/Second/Third Boot Device

Set the boot device sequence as BIOS attempts to load the disk
operating system.
Settings Description
LS120 Boot from LS120
Hard Disk Boot from the HDD
CDROM Boot from CDROM
ZIP100 Boot from ZIP100
USB-FDD Boot from USB Floppy
USB-ZIP Boot from USB ZIP drive
USB-CDROM Boot from USB CDROM
Legacy LAN Boot from network drive
Disabled Disable the boot device sequence

Boot Other Device

Enables the system to boot from alternate devices if the system fails
to boot from the "First/Second/Third Boot Device" lists.
Settings Description
Disabled No alternate boot device allowed
Enabled Enable alternate boot device

Boot Up NumLock Status

Set the NumLock status when the system is powered on.
Settings Description
Off Forces keypad to behave as arrow keys
On Forces keypad to behave as 10-key

Typematic Rate Setting

Enable "Typematic Rate" function.
Settings: [Disabled, Enabled]

Typematic Rate (Chars/Sec)

This item sets the rate (characters/second) at which the system
retrieves a signal from a depressed key.
Settings: [6, 8, 10, 12, 15, 20, 24, 30]

Typematic Delay (Msec)

This item sets the delay between, when the key was first pressed
and when the system begins to repeat the signal from the
depressed key.
Settings: [250, 500, 750, 1000]
51