Table of Contents
Advertisement
Chapter 3
PNP/PCI C
ONFIGURATIONS
This section describes the BIOS configuration of the PCI bus system. This
section covers some very technical items and it is strongly recommended that
only experienced users should make any changes to the default settings.
PNP OS Installed
Yes
When set to
, BIOS will only initialize the PnP cards used for booting (VGA,
IDE, SCSI). The rest of the cards will be initialized by the PnP operating
No
system like Windows 95 or 98/98SE. When set to
, BIOS will initialize all
Yes
the PnP cards. Set to
the operating system is Plug & Play capable.
No
Yes
Settings:
and
Reset Configuration Data
Disabled
Enabled
Normally, you leave this field
. Select
to reset Extended
System Configuration Data (ESCD) when you exit Setup if you have installed
a new add-on and the system reconfiguration has caused such a serious
Enabled
conflict that the operating system can not boot. Settings:
and
Disabled
48
Advertisement
Table of Contents
