Installing A Mini Pcie And/Or Msata Card; Installing The Mini Pcie Card - DFI EC800 User Manual

Installing a Mini PCIe and/or mSATA card

Installing the Mini PCIe Card

1. Locate the Mini PCIe slot on the system board.
2. The system board is equipped with 2 Mini PCIe slots. The Mini PCIe slot supports full length
and half length Mini PCIe card. Note the key on the slot. The key ensures the Mini PCIe card
can be plugged into the slot in only one direction.
Chapter 3 Installing Devices
PCIe x1, USB,
3G signal
PCIe x1, USB,
Wi-Fi signal
Full length
Half length
Chapter 3
3. Grasping the Mini PCIe card by its edges, align the card into the slot at an approximately 30
degrees angle. Apply fi rm even pressure to each end of the card until it slips down into the
slot. The contact fi ngers on the edge of the card will almost completely disappear inside the
slot.
4. Push the Mini PCIe card down and use the provided mounting screws to secure the card on the
system board.
13
PCIe x1, USB, and 3G
signals
PCIe x1, USB, and
Wi-Fi signals
Mounting Screw
www.dfi .com