Table of Contents
Advertisement
Save & Exit
Aptio Setup Utility - Copyright (C) 2012 American Megatrends, Inc.
Main
Advanced
Chipset
Boot
Security
Save Changes and Reset
Discard Changes and Reset
Save Options
Restore Defaults
Save as User Defaults
Restore User Defaults
Boot Override
Version 2.14.1219. Copyright (C) 2012 American Megatrends, Inc.
Save Changes and Reset
To save the changes, select this field and then press <Enter>. A dialog box will ap-
pear. Select Yes to reset the system after saving all changes made
Discard Changes and Reset
To discard the changes, select this field and then press <Enter>. A dialog box will
appear. Select Yes to reset the system setup without saving any changes.
Restore Defaults
To restore and load the optimized default values, select this field and then press
<Enter>. A dialog box will appear. Select Yes to restore the default values of all the
setup options.
Save as User Defaults
To save changes done so far as user default, select this field and then press <En-
ter>. A dialog box will appear. Select Yes to save values as user default.
Restore User Defaults
To restore user default to all the setup options, select this field and then press <En-
ter>. A dialog box will appear. Select Yes to restore user default.
Chapter 7 BIOS Setup
Chapter 7
Save & Exit
Reset the system after
saving the changes.
Select Screen
Select Item
Enter: Select
+/ -:
Change Opt.
F1:
General Help
F2:
Previous Values
F3:
Optimized Defaults
F4:
Save & Exit
ESC: Exit
.
Updating the BIOS
To update the BIOS, you will need the new BIOS file and a flash utility, AFUDOS.EXE.
Please contact technical support or your sales representative for the files.
To execute the utility, type:
A:> AFUDOS BIOS_File_Name /b /p /n
then press <Enter>.
C:\AFU\AFUDOS>afudos fi lename /B /P /N
+--------------------------------------------------------------------------------------------------------+
|
AMI Firmware Update Utility(APTIO) v2.25
|
Copyright (C)2008 American Megatrends Inc. All Rights Reserved.
+--------------------------------------------------------------------------------------------------------+
Reading fi le ..............................
done
Erasing fl ash .............................
done
Writing fl ash .............................
done
Verifying fl ash ..........................
done
Erasing BootBlock ....................
done
Writing BootBlock ....................
done
Verifying BootBlock .................
done
C:\AFU\AFUDOS>
After finishing BIOS update, please turn off the AC power. Wait about 10 seconds and then
turn on the AC power again.
43
|
|
www.dfi .com
Advertisement
Table of Contents
