5. Secure the SATA drive bay with the mounting screws you removed in step 2.
Mounting screw
Chapter 3 Installing the Devices
Chapter 3
Installing a Mini PCIe Card
The system board is equipped with 2 Mini PCIe slots: one full-size and one half-size slot. Here we
will demonstrate the installation of a full-size Mini PCIe card.
1.
Grasp the Mini PCIe card by its edges and align the notch in the connector of the PCIe card
with the notch in the connector on the system board.
2.
Push the Mini PCIe card down and use the provided mounting screws to secure the card on
the system board.
Note:
The system also has a half-size Mini PCIe slot that can accommodate either a Mini PCIe or an
mSATA card. Refer to jumper settings for signal selection for this slot.
12
Mounting Screw
www.dfi.com