Page 1
Quick Installation Guide EC700-AL www.dfi.com Package Contents • EC700-AL System Unit • Mounting screws for SATA, Mini PCIe and M.2 Panel Status LED Reset Switch HDMI/DP COM 3 COM 4 Power LAN3 Button Front View Antenna hole LAN 4 LAN 1 USB 3.0...
Page 2
Removing the Chassis Cover Before working inside your system, observe the following precautions: Make sure the system and all other peripherals connected to it have been powered off. Retention Notch Disconnect all power cords and cables. The 4 mounting screws on the bottom of the system are used to secure the cover to the Notch DDR3 SO chassis.
Page 3
Installing Mini PCIe, M.2, mSATA and SIM The system has one M.2 type 2230 socket (E Key), which provides PCIe Gen2 x1 and USB2.0 interfaces and supports the installation of an M.2 22 x 30mm card. The system board is also equipped with 2 full-size Mini PCIe slot: Mini PCIE2 and mSATA. The Mini PCIe Soc Mini PCIe Module mSATA slot provides SATA interface that accommodates mSATA cards whereas the Mini PCIE2...
Page 4
Auto-PWR ON 2-3 On DFI reserves the right to change the specifications at any time prior to the product's release. This QIG may be based on versions that do not resemble your actual products. For the latest revision and more details of the installation procedure, please refer to https://go.dfi.com/EC700-AL or scan the QR code on the right.