Chapter 3 - Installing Devices; Removing The Chassis Cover - DFI EC800 User Manual

Chapter 3 - Installing Devices

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it has been powered-off.
2. Disconnect all power cords and cables.
3. The 4 mounting screws on the bottom side (labeled side) of the system are used to secure the
cover to the chassis. Remove these screws and then put them in a safe place for later use.
4. After removing the mounting screws, lift the cover up.
Lift the Cover Upward
Chapter 3 Installing Devices
Chapter 3
5. The CFast socket, and Mini PCIe/mSATA slot are readily accessible after removing the chassis
cover. And the SIM slot is also accessible at the side of the system board.
CFast Socket
Mounting Screw
11
PCIe x1, USB,
3G signal
mSATA
PCIe x1, USB,
Wi-Fi signal
SIM slot
www.dfi .com