Download Print this page
DFI EC70B-SU Installation Manual

DFI EC70B-SU Installation Manual

Hide thumbs Also See for EC70B-SU:

Advertisement

Quick Links

EC70B-SU Installation Guide
• 1 EC70B-SU system unit
• Mounting screws for Mini PCIe modules
• Accessories for M.2 modules
• 1 Quick Installation Guide
• 1 CD disk includes:
Front View
Remote
Rear View
power-on Switch
Notes:
1.
COM 1 and COM 2 can be selected among RS232, RS422 and RS485 whereas COM3 to COM 6 are
fixed at RS232.
2.
CFast slot is optional and only available upon request.
DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and details of the
installation process, please refer to the user's manual.

Package Contents

- Drivers / Manual
Status LED
(blue)
COM 1
Power with LED
(green)
Reset
COM 5
Line-out
COM 3
Antenna
www.dfi.com
Panel
(1)
(1)
COM 2
VGA
(2)
COM 6
CFast
USB 3.0
USB 3.0
Mic-in
HDMI
PoE
8-bit DIO
Antenna
hole
hole
1
COM 4/ 8-bit DIO
HDD LED
USB 3.0
LAN 1
LAN 2
DC-in

Advertisement

loading

Summary of Contents for DFI EC70B-SU

  • Page 1: Package Contents

    CFast slot is optional and only available upon request. DFI reserves the right to change the specifications at any time prior to the product's release. For the latest revision and details of the installation process, please refer to the user's manual.
  • Page 2: Removing The Chassis Cover

    Removing the Chassis Cover Please observe the following guidelines and follow the procedure to open the system. 1. Make sure the system and all other peripheral devices connected to it have been powered-off. 2. Disconnect all power cords and cables. 3.
  • Page 3 Installing an M.2 card The system is equipped with one M.2 socket (SATA signals) and supports 42mm, 60mm and 80mm M.2 SSDs. To install an 80mm M.2 SSD: 1. Align the notch at the edge of the M.2 card with the key in the connector. 2.
  • Page 4: Installing A Mini Pcie Card

    Installing a Mini PCIe Card The system board is equipped with 2 Mini PCIe slots: one full-size and one half- size slot. Here we will demonstrate the installation of a full-size Mini PCIe card. The PCIe sockets are located on the main board; to access the main board, detach the expansion board on top of it.
  • Page 5 Auto-PWR ON 2-3 On 2-3, 5-6, 8-9, 11-12 On Mini PCIe PCIe/SATA Select Note: PCIe 2-3 On You cannot use COM 4 and DIO at the same time. Please set JP1 and JP2 together. SATA 1-2 On (default) www.dfi.com A46401730...