Installing The Mini Pcie Card - DFI DT122-BE User Manual

Installing the Mini PCIe Card

1. The Mini PCIe slot is located on the system board.
2. The system board is equipped with 1 Mini PCIe slot. The Mini PCIe slot supports a half length
or a full length Mini PCIe card. Note the key on the slot. The key ensures the Mini PCIe card
can be plugged into the slot in one direction only.
Chapter 3 Installing Devices
Chapter 3
3. Grasping the Mini PCIe card by its edges, align the card into the slot at an approximately 30
degrees angle. Apply fi rm even pressure to each end of the card until it slips down into the
slot. The contact fi ngers on the edge of the card will almost completely disappear inside the
slot.
Mini PCIe slot
Mini PCIe card
4. Push the Mini PCIe card down and use the provided mounting screws to secure the card on
the system board.
Mounting Screw
13
www.dfi .com