DIN Rail Mount
The DIN Rail mount kit includes the following:
•
1 DIN Rail mount bracket
•
1 bracket
•
Bracket screws
1. Turn the system to the bottom side (labeled side) and top side and locate the mounting
screw. Remove these screws and then put them in a safe place for later use.
Mounting Screw
Bottom side
Chapter 6 Mounting Options
Chapter 6
Top side
Mounting Screw
30
2. Align the mounting holes of the system and the mounting holes on the bracket, and then
use the screws removed on step 1 to secure the bracket in place.
Bracket
EC800
3. The 3 mounting holes on the bracket of the system is used to mount the DIN rail bracket.
Mounting Holes
Bracket
Mounting Holes
EC800
Bracket
EC800
www.dfi .com