Getting The Know The Ec800 Series; Front View - DFI EC800 User Manual

Getting to Know the EC800 Series

Front View

LAN 2
Mic-in
HDD LED
COM
USB Ports
Used to connect USB 2.0/1.1 devices.
LAN Ports
Used to connect systems to a local area network.
Mic-in
Used to connect an external microphone.
COM Port
Used to connect serial devices.
CFast Socket
Used to insert a CFast card.
Status LED
This LED will blink when the system is in the standby mode.
HDD LED
Indicates the status of the hard drive.
Power Button with LED
Press to power-on or power-off the system.
Reset Button
Press to reset the system.
Chapter 1 Introduction
Reset
LAN 1 USB Power
CFast Status LED
Chapter 1
Rear View
with DVI-I
with VGA and micro HDMI
Wi-Fi/3G Antenna Hole
Used to connect to a Wi-Fi antenna.
DVI-I Port
Used to connect a DVI device.
VGA Port
Used to connect a VGA device.
micro HDMI Port
Used to connect a micro HDMI device.
COM Port
Used to connect serial devices.
Line-out
Used to connect to a speaker.
DC-in jack
Used to plug a power adapter.
8
Wi-Fi/3G Wi-Fi/3G
Antenna Antenna
9~24V DC-in DVI-I Line-out COM
Wi-Fi/3G Wi-Fi/3G
Antenna Antenna
Line-out
9~24V DC-in VGA COM 2
micro HDMI
www.dfi .com