Installing A Mini Pcie Card - DFI WM343-SD Series Installation Manual

Installing a Mini PCIe Card

The system board is equipped with one Mini PCIe slot that uses USB, PCI
and mSATA signals.
1. Grasp the Mini PCIe card by its edges and align the notch in the
connector of the PCIe card with the notch in the connector on the
system board.
2. Push the Mini PCIe card down and use the provided mounting screws to
secure the card on the system board.
Note:
The Mini PCIe slot is only available in WM343-SD330 (Intel
®
11
Mounting screw
Q170 Chipset).