Electronic Control System - Suzuki Swift User Manual

ELECTRONIC CONTROL SYSTEM

The electronic control system consists of 1) various
sensors which detect the state of engine and driving
conditions, 2) ECM which controls various devices
according to the signals from the sensors and 3) vari-
ous controlled devices.
Functionally, it is divided into following sub systems:
D Fuel injection control system
D Idle speed control system
INFORMATION SENSORS
1. MAP sensor
2. TP sensor
3. IAT sensor
4. ECT sensor
5. Heated oxygen sensor-1
6. VSS
7. Ignition coil
8. Battery
9. Distributor (CMP sensor)
10. A / C controller (if equipped)
11. CKP sensor
12. CTP switch (in ISC actuator)
13. Heated oxygen sensor-2
ENGINE AND EMISSION CONTROL SYSTEM (TBI FOR G10) 6E1-5
D Fuel pump control system
D A/C control system (if equipped)
D Radiator fan control system
D Evaporative emission control system
D EFE heater control system
D Oxygen sensor heater control system
D Ignition control system
D A/T control system
CONTROLLED DEVICES
a : Fuel injector
b : EVAP canister purge valve
c : Fuel pump relay
d : Malfunction indicator lamp
e : ISC actuator
f : Radiator fan control relay
g : Ignitor
h : EFE heater relay
i : ISC actuator relay
OTHERS
A : ECM (PCM)
B : Main relay
C : EVAP canister
D : Injector resistor
E : EFE heater
F : Electric load diode
G : Data link connector