Suzuki Swift User Manual page 270

6A-6 ENGINE MECHANICAL (G10, 1-CAM 6-VALVES ENGINE)
4) Remove air cleaner assembly.
5) Disconnect the following electric lead wires:
D EGR valve
D ISC actuator (2)
D Ground wires from intake manifold
D Fuel injector (4)
D TP sensor (3)
D EFE heater (5)
D Engine coolant temp. gauge
1. Throttle body
6) Disconnect fuel return (4) and feed hoses (3) from fuel pipes.
7) Disconnect coolant hoses from intake manifold.
1. Throttle body
2. ISC actuator
5. Clamp
8) Disconnect the following vacuum hoses.
D Canister purge hose from intake manifold.
D EGR pressure transducer hoses from EGR valve.
D EGR valve hose from EGR valve.
D Pressure sensor hose from intake manifold.
D Brake booster hose from intake manifold.
9) Disconnect breather hose from PCV valve.
10) Disconnect accelerator cable from throttle body.
11) Disconnect other connected to throttle body and intake man-
ifold, if any.
12) Remove intake manifold with throttle body from cylinder head.
13) Remove throttle body from intake manifold.