Suzuki Swift User Manual page 360

ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE) 6A1-65
12) Disconnect the following electric wires:
D Ignition coil assembly
D Ground wires from intake manifold
D Engine oil pressure switch
D EVAP canister purge valve (if equipped)
D Engine coolant temp. sensor
D Fuel injectors
D Power steering pressure switch (if equipped)
D Oxygen sensor-1
D Back-up light switch (M/T)
D Transmission range switch (A/T)
D A/T vehicle speed sensor (A/T)
D Solenoid coupler (A/T)
D Generator
D Starter
D Battery negative cable from transmission
D TP sensor
D IAC valve
D CMP sensor
D MAP sensor
and then release wire harnesses from clamps.
13) Disconnect the following hoses:
D Canister purge hose (2) from EVAP canister purge valve
D Brake booster hose (1) from intake manifold
D Radiator outlet hose from inlet pipe
D Heater inlet and outlet hose from heater unit
14) Disconnect fuel feed (2) and return hoses (3) from fuel delivery
pipe (1).