Suzuki Swift User Manual page 251

STEP
2 Check MAP Sensor
1) Remove MAP sensor from intake manifold and connect
vacuum pump gauge to MAP sensor. See Fig. 2.
2) Connect scan tool to DLC and turn ignition switch ON.
3) Check intake manifold absolute pressure displayed on
scan tool under following conditions.
Applying Vacuum
0
27 kPa
200 mmHg
67 kPa
500 mmHg
Is check result satisfactory?
Fig. 2 for Step 2
ENGINE GENERAL INFORMATION AND DIAGNOSIS (SFI FOR G13) 6-1-95
ACTION
Displayed Value on Scan Tool
Barometric pressure
(Approx. 100 kPa, 760 mmHg)
Barometric pressure –27 kPa
(Approx. 73 kPa, 560 mmHg
Barometric pressure –67 kPa
(Approx. 33 kPa, 260 mmHg)
YES
Check air intake Replace MAP
system for air sensor.
being drawn in
and engine
compression.
If OK, then
substitute a
known-good ECM
(PCM) and
recheck.
NO