ENGINE MECHANICAL (G13B, 1-CAM 16-VALVES ENGINE) 6A1-79
8) Install pistons and connecting rods as previously outlined.
9) Install oil pump strainer and oil pan as previously outlined.
10) Install cylinder head assembly to cylinder block as previously
outlined.
11) Install camshaft, crankshaft timing belt pulley, timing belt,
crankshaft pulley, water pump pulley, etc., as previously out-
lined.
12) Install clutch to flywheel (for M/T vehicle). For clutch installa-
tion, refer to "CLUTCH" section.
13) Install engine mountings and brackets.
Refer to tightening torque for INSTALLATION of "ENGINE AS-
SEMBLY" in this section.
14) Install engine with transmission to vehicle as previously out-
lined.