Suzuki Swift User Manual page 25

Swift suzuki
Hide thumbs Also See for Swift:
Table of Contents

Advertisement

When using floor jack:
In raising front or rear vehicle end off the floor by jacking, be sure
to put the jack against the center portion of front cross member (1)
or rear cross member (2).
WARNING:
D Never apply jack against suspension parts (i.e., stabilizer,
etc.) or vehicle floor, or it may get deformed.
D If the vehicle to be jacked up only at the front or rear end,
be sure to block the wheels on ground in order to ensure
safety.
After the vehicle is jacked up, be sure to support it on
stands. It is extremely dangerous to do any work on the
vehicle raised on jack alone.
To perform service with either front or rear vehicle end jacked up,
be sure to place safety stands under body so that body is securely
supported. And then check to ensure that body does not slide on
safety stands and the vehicle is held stable for safety's sake.
GENERAL INFORMATION 0A-21

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Swift sf310Swift sf413

Table of Contents