System Shutdown - Avaya Partner Administration Manual

15.9 System Shutdown

Before maintenance on the phone system it should be shutdown using one of the processes below. Just simply switching
off power to the phone system may cause data to be lost.
Maintenance includes actions such as removing any of the SD cards in the phone system's Optional SD and System SD
card slots.
Once the system has shutdown you can switch off power to the system. To restart the system switch the power back on.
· WARNING
This process will restart the phone system and disconnect all currently connected calls.
To shutdown the system (ETR 18D/34D)
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #729.
3. At the Shutdown - Save All: prompt press
4. When the system has completely shutdown, the phone display will be blank. The LED 1s on the front of the phone
system will alternately flash red/orange and the CPU LED on the rear of the phone system will flash orange.
5. Power to the system can now be switched off.
To shutdown the system (1408/1416 Phone)
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the up or down
Select.
3. Dial #729.
4. At the Shutdown - Save All: prompt press Proceed.
5. When the system has completely shutdown, the phone display will be blank. The LED 1s on the front of the phone
system will alternately flash red/orange and the CPU LED on the rear of the phone system will flash orange.
6. Power to the system can now be switched off.
PARTNER Phone Administration
IP Office PARTNER Version
Enter
arrow buttons to scroll the display to System Administration. When displayed, press
.
14
System Maintenance: System Reset
- Issue 1b (22 February 2010)
Page 159