Auto Dial - Other - Avaya Partner Administration Manual

14.6 Auto Dial - Other

A button set to this function allows the user to make a call using a number stored by the button. The number can be an
internal number, an external number, an account code or any other number. The button can then be used when a
number of that type needs to be dialed.
To create an auto dial - other button (ETR 18D/ETR 34D Phone)
1. Do one of the following depending on whether you want to change the button programming of the extension or of
another extension.
To program the extension
1. At the phone press Feature 00.
2. Program Extension: is shown on the
display.
3. Press the button that you want to edit or
enter from 03 to 80 or press the
corresponding line appearance button
directly.
4. The current setting of that button is displayed.
3. Press Intercom 2.
4. Enter the number for calls made using the button. The number can include * and # and the following special
characters:
Function Press to insert
Pause HOLD
Transfer SPEAKER
Stop CONFERENCE
5. The current setting of the button will now be AD-O followed by the stored number.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To create an auto dial - other button (1408/1416 Phone)
1. Do one of the following depending on whether you want to change the button programming of the extension or of
another extension.
To program the extension
1. At the extension press Admin.
2. Press the programmable button you
want to change. Alternatively:
· Use the up or down
scroll to Telephone Programming
. Press Select.
· At the Button: prompt press the
button to edit or enter from 03 to
80 or press the corresponding line
appearance button directly.
2. The current setting of that button is displayed.
3. Press Program and either press Intercom 2 or use the
Auto Dial - Other and press Select.
4. At the AD-O: prompt enter the number for calls made using the button. The number can include * and # and the
following special characters:
Function Press to insert
Pause HOLD
Transfer SPEAKER
Stop CONFERENCE
PARTNER Phone Administration
IP Office PARTNER Version
To program another extension
1. At one of the system administration telephones (extension 10
and 11), press Feature 00 followed by two presses of
Intercom 1 and one press of Intercom 2. Centralized
Programming: is shown on the display.
2. At the Extension: prompt enter the number of the extension.
3. Enter from 03 to 80 to select the line button you want to edit or
press the corresponding line appearance button directly.
Character Description
P Inserts a 1.5 second pause.
R Send a hook-switch flash signal.
S Stop dialing.
To program another extension
1. At extension 10 or 11, press Admin.
2. Use the
Centralized Programming. When displayed, press Select.
arrows to 3. At the Extension: prompt enter the extension that you want to
configure.
4. Use the
Button Programming. When displayed, press Select.
5. At the Button: prompt enter from 03 to 80 or press the
corresponding line appearance button directly..
Character Description
P Inserts a 1.5 second pause.
R Send a hook-switch flash signal.
S Stop dialing.
Button Programming: Auto Dial - Intercom
up or down arrow buttons to scroll the display to
up or down arrow buttons to scroll the display to
up or down arrow buttons to scroll the display to
Page 119
- Issue 1b (22 February 2010)