Voicemail Password - Avaya Partner Administration Manual

10.3 Voicemail Password

Extension users can set an access code for their mailbox. When they do this, the access code is request when they access
the mailbox. If the user forgets their password you can use system administration to remove it.
To remove a user's mailbox access code (ETR 18D/34D)
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #324. The display shows Reset Voice Mail Pwd.
3. At the Extension: prompt enter the two-digit number of the extension.
4. Press Enter.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To remove a user's mailbox access code (1408/1416 Phone)
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the up or down
Select.
5. Dial #324. The display shows Reset Voice Mail Pwd.
6. At the Extension: prompt enter the two-digit number of the extension.
7. Press Proceed.
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
PARTNER Phone Administration
IP Office PARTNER Version
arrow buttons to scroll the display to System Administration. When displayed, press
Voicemail: VMS Coverage Rings
- Issue 1b (22 February 2010)
Page 85