Avaya Partner Administration Manual page 114

Function
Pickup Group
140
Privacy
141
Recall
142
Save Number Redial
143
Simultaneous Page
144
Station Lock
145
Station Unlock
146
VMS Cover
147
VMS Mailbox Transfer
Some functions are unique, ie. if already assigned to a button, assigning the function to another button will automatically
clear the setting from the existing button.
Some functions are only supported on buttons that include lights to indicate status. If programmed onto a button without
lights the function may not work.
PARTNER Phone Administration
IP Office PARTNER Version
Description
A button set to this function allows the user to answer a call being
presented to any extension that is a member of the
configured for the button.
95
A button set to this function allows the user to turn privacy on or
off. When on, other extensions are not able to bridge into the
user's calls.
A button set to this function allows the user to send a recall or
hook flash signal.
A button set to this function allows the user to save the number
dialed during a call and to redial that number when idle. This can
be used when the number dialed does not answer.
A button set to this function allows the user to save the number
dialed during a call and to redial that number when idle. This can
be used when the number dialed does not answer.
A button set to this function allows the user to lock their extension
from being used to make calls. After they press the button, they
are prompted to enter a four digit code after which the extension is
locked. If the extension is already locked, pressing the button
prompts for reentry of the four digit code to unlock the extension.
A button set to this function allows the user to unlock any
extension without needing to know the code that was used to lock
that extension. This function can only be used by extensions 10
and 11. When the button is pressed, the user is prompted to enter
the number of the locked extension.
A button set to this function allows the user to switch use of
voicemail coverage for their extension on or off.
A button set to this function allows the user to transfer their
148
current call to an extension's mailbox. After pressing the button,
the current call is put on hold and the user can then enter the
target extension number to indicate the mailbox required.
Shortcut
Intercom 1,
pickup group <661-664>
07
03
04
Intercom 1,
*70
21
22
15
14
- Issue 1b (22 February 2010)
LED
-
-
-
-
-
-
-
-
Page 114