Loudspeaker Extension - Avaya Partner Administration Manual

6.3 Loudspeaker Extension

Loudspeaker paging systems allow you to broadcast a message over a large area. Use this feature to specify the
extension port to which you connected the loudspeaker paging system.
The extension is used by the
To specify the extension to which the loudspeaker paging system is connected (ETR
18D/34D)
1. At a system administration extension (10 and 11); with the phone idle press Feature 0 0 followed by two presses
of Intercom 1. System Administration: is shown on the display.
2. Dial #617. The phone displays Loudspeaker Paging Ext.
3. Enter the extension number and then press Enter.
· Exit programming by pressing Feature 00. You can also exit programming mode by lifting the handset, then place
it back in the cradle.
To specify the extension to which the loudspeaker paging system is connected
(1408/1416 Phone)
1. At either of the system administration telephones (extensions 10 and 11), with the phone idle press Admin.
2. Use the up or down
Select.
3. Use the up or down
Select.
· Alternatively, dial # and the same code as used by ETR phones for
4. Use the up or down
Select.
5. Enter the extension number of the extension port connected to the loudspeaker paging system or Clear to return
to the default setting (no loudspeaker).
· Exit programming by pressing PHONE/EXIT. Alternatively use the Back button to move to another menu.
PARTNER Phone Administration
IP Office PARTNER Version
Loudspeaker Page and
138
arrow buttons to scroll the display to System Administration. When displayed, press
arrow buttons to scroll the display to Auxiliary Equipment. When displayed, press
arrow buttons to scroll the display to Loudspeaker Paging Ext. When displayed, press
Simultaneous Page functions.
144
system administration
Auxiliary Equipment: Contact Closures
.
7
- Issue 1b (22 February 2010)
Page 55