Pairing Guide And Daily Use; Streamer And Cell Phones; Pairing; Daily Use - oticon Vigo Connect Fittings Manual

Pairing Guide and Daily Use

Before using Streamer with a Bluetooth cell phone, the
TV, or other Bluetooth devices, Streamer must be paired to
each of these devices. Pairing means a wireless link is estab-
lished between the two units, enabling them to identify each
other and communicate whenever they are turned on and
within range of each other. Pairing is done by placing both
units into pairing mode. The units automatically will search
and find each other.
Adjusting Volume
Use the Up/Down button on Streamer to adjust the phone
volume level in the hearing instruments.
To adjust the volume, press Up or Down shortly. Repeat the
short press to do further adjustments.
Note:The volume level when streaming set by Streamer is
memorized. The next time your client is watching TV/making
a phone call, the memorized volume level will be applied.
The memorized volume level is reset when the "Connect"
function is turned off.
34 VIGO CONNECT FIT TING GUIDE
Muting the hearing instrument microphones
By default, the hearing instrument microphones are enabled.
To mute the microphones in order to hear the phone conversa-
tion better, press and hold the Volume button for 2 seconds
(up or down).
Pressing the Volume button for 2 seconds again activates
the hearing instrument microphones.
Note: the microphone state is memorized for each streaming
application by Streamer. Next time your client is watching
TV/making a phone call, the memorized microphone state
will be used.
The memorized microphone states are reset when the
"Connect" function is turned off.

Streamer and Cell Phones

Pairing

Prepare the cell phone:
1. Refer to the manual of the cell phone for detailed instruc-
tion on how to conduct the pairing (normally, it is referred
to as "find new audio equipment"). Set up the cell phone
as instructed.
Note: For further information refer to the pairing guide
located on www.oticonusa.com
Prepare Streamer:
2. Confirm that the key lock is deactivated.
3. Press the Streamer Bluetooth button for 5 seconds until
the blue light starts flashing rapidly.
The two devices are now establishing a connection to
each other.
Cell phone handling:
4. When the cell phone has received Streamer information,
'Streamer 1.2' will appear in the display.
5. Go to 'Streamer 1.2' in the cell phone display and
press select.
6. You will now be prompted for a pincode: all Streamer pin-
codes are four zeros (0 0 0 0) – note, that just like for other
pincodes the 0's most probably will appear as asterisks (*).
7. Streamer and the cell phone are now paired.
The pairing is done only once. If the phone is switched off
or the Streamer battery is drained, the units will remained
paired when turned on again.

Daily Use

Phone calls with Streamer
Streamer must be within 10 meters of the cell phone.
Wear Streamer around the neck in the neck strap. (It is an
antenna).
The Bluetooth connection must be active in order for the
wireless connection between Streamer and the cell phone to
work:
Press and hold the Connect button for 2 seconds until the
blue light turns on. After one minute the blue light will auto-
matically go into sleep mode to prolong battery lifetime.
35