Attaching The Speaker Unit; Attaching The Ear Grip - oticon Vigo Connect Fittings Manual

Attaching the Speaker Unit

Attach the speaker unit by inserting it into the shell
until it snaps into place.
1
46 VIGO CONNECT FIT TING GUIDE
2 3
Replacing the Speaker Unit
The best way to replace the speaker is by using the Multi tool
with the dedicated extension point. The extension point is
placed on the screw driver tip.
Press the speaker locking lever through the hole to release
the speaker unit and gently pull the speaker unit out.

Attaching the Ear Grip

The ear grip should be used to obtain a more secure hold
in the ear canal. It is available in one version for both left
and right ears. Insert the ear grip in the slot in the receiver.
Important: Pull the ear grip until its top is positioned in
the slot. During insertion, the top should point away from
the dome as illustrated. If it is wrongly inserted, the ear grip
might be difficult to place in the concha.
47