Taking Off The Rite Mold - oticon Vigo Connect Fittings Manual

RITE Mold Speaker Insertion
1 2
Note: Make sure that the speaker is not angled when inserted into the mold. An odd angle will prevent the speaker from
engaging the adaptor. The click sound indicates that the speaker is placed correctly, and it should be done with only a
little force. Don't force the two units together!
64 VIGO CONNECT FIT TING GUIDE
Canal Speaker Insertion
3a 3b

Taking off the RITE Mold

The RITE Mold can't be detached from the receiver with-
out the Micro Mold tool.
When detaching the RITE Mold follow the instructions to the
right:
1
1. Remove the Wax Stop.
2. Place the RITE Mold in the tool as illustrated making sure
that the cross in the adaptor is matching the tip of the
tool.
3. Press the tool into the mold to release the speaker unit.
4. Now the RITE Mold can be removed from the speaker unit.
2 3
65