Fitting Assistant - oticon Vigo Connect Fittings Manual

Fitting Assistant

24 VIGO CONNECT FIT TING GUIDE
The Fitting Assistant is a tool designed to deal with common
problems that require adjusting the hearing instrument at
the fitting or follow-up visit.
To operate the Fitting Assistant, select the tab that expresses
the client's complaint and then a control (such as Loudness).
Click the control to adjust it.
The adjustments made in the Fitting Assistant are immediately
visible in the graphs. When you open the tool in the future,
you can see how far from the starting point (the middle)
the controls have been moved.
The Fitting Assistant can be used individually for each
program in the instrument.
Real Ear Measurements
The Genie REM tool lets you verify your fitting by comparing
your Real Ear Measurement equipment with Genie.
Use the tool to activate or deactivate advanced features to
match the purpose of the measurement.
In order to compare your measurement to target and simu-
lated curves in Genie, make sure that the Genie curves are
based on the same signal type and level as measured.
Note: For custom instruments you cannot verify the Direction-
ality when the programming cable is in the instrument.
Also, the response in REM can be affected by interference
of the programming cable.
25