Connecting To Genie - oticon Vigo Connect Fittings Manual

Connecting to Genie

Vigo Connect is programmed using the Genie fitting
software compatible with NOAH 3.0. Oticon program-
ming cable #3 (right and left) is used to program all
devices.
Programming Adaptors
Flex connect for CIC
Programming shoe for all RITE and BTE models
Programming adaptor for HS/LP and ITC
6 VIGO CONNECT FIT TING GUIDE
Connecting the Programming shoe to BTE or RITE
1. Open the battery door on the instrument and slide the
programming shoe into the guide as shown. Insert battery.
2. Close the battery door and attach the HI-PRO or
NOAHlink cable.
Connecting the Programming adaptor to HS/LP and ITC
1. Open the battery door and slide the programming
adaptor into the battery door as shown. Make sure the
red arrow marking on the adaptor is next to the + marking
on the guide.
2. Close the battery door and attach the HI-PRO or
NOAHlink cable.
Cordless Fitting with nEARcom
3. With nEARcom you have the possibillty of escaping
from the cable jungle and fitting Vigo Connect instruments
cordlessly. To learn more about cordless fitting with
nEARcom, see page 8.
7