Rite Mold; Short Vents - oticon Vigo Connect Fittings Manual

RITE Mold

The RITE Mold (Micro Mold) is an acrylic custom solution that
can be used instead of a dome for a RITE fitting. Addition-
ally, RITE molds are available in ITC, canal lock, and skeleton
styles for improved retention when necessary.
60 VIGO CONNECT FIT TING GUIDE
RITE Molds are produced from a traditional, deep impression.
The adaptor clearly indicates R (red) /L (blue) with a color
marking.
Up Indicator
WaxStop
Adaptor

Short Vents

RITE Molds use tube-shaped vents, as in traditional ear
molds, but the length is shorter than standard vents. There-
fore, the RITE Mold vent effect is much larger than its actual
diameter. Genie prescribes the vent size when RITE Mold is
selected, e.g. Large (short).
Check the RITE Mold vent size under Acoustics in the Fitting
step. For further information about selecting vent sizes and
effective vent sizes please refer to the Genie helpfiles under
Acoustics.
RITE Molds Actual vent size (mm)
X-Large >2.4
Large 2.4
Medium 1.4
Small 0.8
No Vent
61
0