Pairing Guide/Daily Use - oticon Agil Manual

Pairing guide and Daily use
Before using Streamer it has to be paired to the device it
should connect to. A wireless link is established between the
two units, enabling them to identify each other and commu­
nicate whenever they are turned on and within range of each
other. Pairing is done by placing both units into pairing mode.
The units automatically will search and find each other.
(please see the following pages for detailed pairing
instructions).
The neck strap is an antenna
Please pay particular attention to the fact that the neck strap
supplied with Streamer is an antenna which is part of the
advanced wireless system. For all other purposes than using
Streamer as a remote, the neck strap should be worn around
the neck.
Please note that the neck strap should never be opened.
The safety lock in the back is a feature designed to break if the
neck strap is caught in something. If the neck strap breaks it
must be replaced.
78 OticOn Agil FITTING GUIDE
Generally, by daily use the neck strap eventually becomes
frayed and dirty and should be replaced regularly.
Adjusting Volume
Use the Up/Down button on Streamer to adjusting the phone
volume level in the hearing instruments. To adjust the volume,
press Up or Down shortly. Repeat the short press to do further
adjustments.
Note: The volume level when streaming set by Streamer is
memorized. Next time your client is watching TV/making
a phone call, the memorized volume level will be applied.
The memorized volume level is reset when the "Connect"
function is turned off.
Muting the hearing instrument microphones
When streaming an audio application, the hearing instrument
microphones are default active. To mute the microphones e.g
to pay full attention to a phone conversation press and hold
the Volume button for 2 seconds (up or down).
Pressing the Volume button for 2 seconds again activates
the hearing instrument microphones.
Note: the microphone state is memorized for each streaming
application by Streamer. Next time your client is watching
TV/making a phone call, the memorized microphone state will
be used.
The memorized microphone states are reset when the
"Connect" function is turned off.
79