Double Button On Bte And Rite; Phone And Accessories - oticon Vigo Connect Fittings Manual

Double Button on BTE and RITE

For BTE and RITE instruments you can choose to make the
control work as program change buttons, or as a volume control,
or both. Discuss with your client which operation should be
included in the instruments. If there is a need for both Volume
Control and Program Change, then you need to consider if you
want both operations on both instruments. Alternately, you can
configure one instrument with program change functionality and
the other with volume control functionality. Remember to enable
binaural coordination to make sure that changes are applied to
both instruments with this configuration.
If you choose to have either the program change or volume
control in the button, this is activated by a short push on
the button. If you choose to have both functionalities in the
instrument, then the volume control is activated by a short
push on the button while a program change is activated by
a medium-long push.
28 VIGO CONNECT FIT TING GUIDE
In the User Instruction task you can print the button configu-
ration and include it in the Instructions For Use to provide the
information for your client.
Beeps
The Beeps tab is used to define the audible alerts for pro-
gram and volume control changes as well as decide when
there should be audible alerts in the instruments.

Phone and Accessories

The Phone and Accessories tool provides an overview of the
phone programs and it helps you to define the functionality of
Auto Phone programs, Streamer programs and DAI/FM pro-
grams when relevant.
For Auto Phone programs you can enable or disable the
functionality and choose whether the program should be a
Microphone or a Telecoil program (when Telecoil is present).
In the Streamer tab you can link Streamer to the Vigo Connect
instruments if you haven't done so at the Save and Exit
screen. You can also set the relationship between Streamer
and microphone signals for Phone conversations as well as
for microphone signals for TV listening.
On the DAI/FM tab you can choose to boost the DAI/FM
signal in situations where both DAI/FM and the microphones
on the instruments are active.
Note: FM is only available in BTE instruments.
29