Taking Off The Ear Grip; Inserting And Placing The Device On The Ear - oticon Vigo Connect Fittings Manual

C
48 VIGO CONNECT FIT TING GUIDE
If the ear grip seems too long in the concha, you may cut/trim
it to the desired length. Use caution not to leave a sharp and
pointy end when cutting as this can cause irritation in the ear.

Taking off the Ear Grip

Use a finger nail to dislodge the ear grip and push from
the other side.

Inserting and placing the device on the ear

1. Insert the speaker with a Dome/RITE Mold in the ear canal.
2. Place the amplifier behind the ear. The speaker unit with
the Dome/RITE Mold should be placed far enough into
the ear so that the speaker wire lies flush with the client's
head. When looking at your client face-to-face, you should
not see the speaker wire protrude/stick out.
1
2
3
4
49