Streamer And The Phone Adapter; Pairing; Daily Use - oticon Vigo Connect Fittings Manual

Streamer and the Phone adapter

(For installation of the Phone adapter refer to the Installation
Guide and Genie Instruction Videos).

Pairing

In order to prepare the plugged-in Phone adapter and
Streamer as a pair, both devices are set into paring mode at
the same time.
1. Assure that Streamer's key lock is deactivated.
2. Press Streamer Connect button for 5 seconds until the blue
light starts flashing rapidly.
3. Press the red Phone button on the Phone adapter for
5 seconds until the red status indicator flashes.
4. Within half a minute the Phone adapter connects to
Streamer and pairing is complete.
5. The red status indicator of the Phone adapter gives a solid
red light.
6. The blue light in the Streamer Connect button gives solid
light for 5 seconds and then shows slow fading light.
Pairing is done only once and will normally not have to be
repeated.
38 VIGO CONNECT FIT TING GUIDE

Daily Use

Phone calls with Streamer
Wear Streamer around the neck in the neck strap.
The Connect function must be active in order for Streamer
and the Phone adapter to work:
Press and hold the Connect button for 2 seconds until the
blue light turns on. After one minute the blue light will
automatically go into sleep mode to prolong battery life.
To turn off the blue light immediately, activate the key lock
slider.
Streamer must be within 10 meters of the Phone adapter and
the red status indicator on the Phone adapter must show
solid light.
Incoming calls
A ringing tune is heard in the hearing instruments and
the green rim light around the Phone button flashes.
Answer
Press Streamer's Phone button shortly. Streamer answers
the call and the green rim light will switch to solid light.
The call is now directed into the hearing instruments.
Talk in the direction of the microphone on Streamer.
The red status indicator on the Phone adapter flashes during
the call.
Hang up
Press Streamer's Phone button shortly.
Streamer hangs up the call, the green rim light turns off and
the hearing instruments return to the previous program.
– The red status indicator on the Phone adapter switches
to solid light.
Make a call
1. Press Streamer's Phone button shortly (or shortly press
the red Phone button on the Phone adapter). You will now
hear the dial tone in the hearing instruments. The green
rim light shows solid light on Streamer's Phone button.
2. Pick up the phone/phone receiver and dial the phone
number.
3. Turn off the phone or put the phone receiver back down.
– The red status indicator on the Phone adapter flashes
during the call.
Hang up
Press Streamer's Phone button shortly.
Streamer hangs up the call, the green rim light turns off, and
the hearing instruments return to the previous program.
– The red status indicator on the Phone adapter switches to
solid light.
Make sure that the phone is turned off, or the receiver is
back on!
39