Checking The Chain For Dirt; Cleaning The Chain - Husqvarna 250 XC TPI 2021 Owner's Manual

11 SERVICE WORK ON THE CHASSIS
11.33
11.34
68
K01189-11
V01590-11

Checking the chain for dirt

400678-01

Cleaning the chain

Warning
Danger of accidents Lubricants on the tires reduces the road grip.
–
Remove lubricants from the tires using a suitable cleaning agent.
–
Mount and tighten screws
Guideline
Remaining screws,
chassis
–
3
Plug in connector for the fuel pump.
–
Remove the wash cap set and thoroughly clean the quick
release coupling using compressed air.
Info
Under no circumstances should dirt enter into the fuel
line. Dirt in the fuel line clogs the injection valve!
–
Spray silicone spray onto a lint-free cleaning cloth and lightly
lubricate the O-ring of the quick-release coupling.
Silicone spray ( p. 141)
–
Join quick release coupling
Info
Route the cable and fuel line at a safe distance from
the exhaust system.
Finishing work
–
Mount the seat. ( p. 59)
–
Check the chain for heavy soiling.
» If the chain is very dirty:
–
Clean the chain. (
2
.
M6 10 Nm (7.4 lbf ft)
4
.
p. 68)