The Print Dialog Box - Avery Dennison Label Printer User Manual

The Print Dialog Box

Printer - Select your
printer from the pull-
down list box. Click
Properties to check or
change the printer
settings.
Selection - Choose one
of the following
options:
• Master Label Only -
Prints the Master
tab design only.
Select this option if
you want to print
identical labels designed on the Master tab, or to print database projects or projects with
serial number fields.
• Current Selected Label - Prints the active label only.
• All Designed Labels - Prints all designed labels in your project.
• Labels - Identifies and prints specific labels. Type the Label tab number, not the tab name,
in the field provided. For a continuous number of labels type the Label tab start and end
numbers separated by a dash. For example, type 3-8 to print Label tabs 3 through 8. To
select a non-continuous number of labels, type the single numbers separated by semicolons.
For example, type 1;5;9 to print Label tabs 1, 5 and 9.
Number of Copies - Choose one of the following options:
• Select Labels and type the number of copies of each selected label to print.
• Or select Sheets and type the number of sheets of the selected labels to print. Printing stops
when the last sheet is full, regardless of the start position. For example, if you type 2 in the
Copies field and select a start position half-way down the first page, only one and one-half
sheets are printed. This option is not available when printing a project with a database.
Start Position - Define the position on the sheet where the printing is to begin by clicking the
Start Position on the preview or by typing a Start Position number. When you open the Print
dialog box, the start position of the previous print job is remembered. Be sure to select a new
Start Position, if necessary.
®
Avery Personal Label Printer 113