Formatting Objects: Fills And Lines - Avery Dennison Label Printer User Manual

Avery personal label printer user's manual

Table of Contents

To move an object more precisely, click on the object to select it. Select Format > Properties

and click the Position tab. Type the Horizontal (distance from left edge) and the Vertical

(distance from top edge) setting for the top left corner of the object. Click OK.

You can also right-click an object to access the Properties dialog box.

Moving and Copying Objects between Label Tabs and Projects

To move an object from one label to another, drag the selected object from the work space of

the one label to the target Master or Label tab on the Tab Bar. Release the mouse. The object

is now moved to the other label. If you click and drag while holding down the Ctrl key, a copy

of the object is created on the other label in the same location.

You can use the same methods to move and copy labels between projects. First, select

Window > Tile to place all open projects next to each other vertically on the screen. Click and

drag the selected object from the work space of one project to the target Master or Label tab

of the other project. If you click and drag while holding down the Ctrl key, a copy of the

object is created.

To turn the Tile feature off, select the Maximize button

on the title bar of the project you

want to work with.

Cut, Copy and Paste Commands

You can also use the Cut, Copy and Paste commands to move and copy objects from one

location to another. When you cut or copy a selected object, it is stored in the computer's

memory on the Microsoft Windows clipboard. The Microsoft Windows clipboard can only

store one cut or copied selection at a time. Cutting and copying selected objects to the

clipboard deletes any data previously held in the clipboard.

The Cut and Copy commands will not be available unless an object is selected. The Paste

command will not be available if the clipboard is empty.

To cut or copy, click on the object to select it. Select Edit > Cut to move the object or Edit >

Copy to copy the object. You can also click

, or

on the Standard toolbar. Click on the

target Master or Label tab of the same project or another project to select that label. Select

Edit > Paste or click

on the Standard toolbar to paste the clipboard contents to the new

location.