Replacing Graphics In Pre-Designed Layouts; Anchoring Objects - Avery Dennison Label Printer User Manual

Replacing Graphics in Pre-Designed Layouts

To replace a graphic in a pre-designed layout, select the Master or Label tab containing the
graphic object. Double-click the graphic. The Replace Image dialog box appears. Or you can
click on the object to select it and choose Insert > Replace Image.
You can also right-click the object to access the Replace Image dialog box.
If unable to select a graphic object in a pre-designed layout, verify the following:
• You have selected the Master or Label tab containing the graphic object.
• The object is not grouped with other objects. Individual objects cannot be edited when
grouped. To replace a graphic, the object must be ungrouped. For additional information,
refer to Grouping Multiple Objects in this section.
• The object is not behind other objects in the design. If you are unable to select an object,
try moving the objects on top of the graphic object to the back. Change the front and back
position of objects within a design using the Order command. For additional information,
refer to Changing the Object Order in this section.
In the Replace Image dialog box, locate and select the new graphic. To maintain the propor-
tions of the new graphic, select the Maintain Aspect Ratio option in the lower left corner of
the dialog box. The size of the new object will adjust accordingly when inserted. If the object's
are different sizes and the Maintain Aspect Ratio option is not selected, the new graphic may
distort when inserted.
When satisfied with your selection, click OK. The original graphic is replaced.

Anchoring Objects

To anchor the position of an object on a label, click on the object to select it. Select Edit >
Anchor. An anchored object cannot be moved, rotated or deleted and its size cannot be
changed. To remove the anchoring of an object, click on the object to select it. Select Edit >
Anchor again.
Anchored objects can be identified by the black handles and by the push pin that appears when
you move the mouse over the object.
®
66 Avery Personal Label Printer