Avery Dennison Label Printer User Manual page 32

More than one label is feeding
through the printer.
The printer will not feed a label.
The labels are misaligned or not
feeding correctly.
®
18 Avery Personal Label Printer
• Make sure the Print Head Opening is free of
debris.
• Use a clean, lint-free cloth to gently wipe inside the
label feed area.
• Make sure you are loading the printer with Avery
labels designed for this machine.
• Press the Advance button.
• Lift the Peel Lever (up) and press the Advance
button.
• Make sure that the labels are rotating over the top of
the Spool (inside top door).
• Make sure that the label roll is properly feeding
through the Print Head Opening.
• Remove the roll and check for jagged edges,
shredding or jammed labels.
• Use the cleaning card to clear the Print Head
Opening and feeder of any debris.
• Check for jammed labels or a blockage of the label
feeder.
• Make sure that the labels are feeding from the far
right side of the front opening.
• Manually straighten the label roll by opening the
Top Door, depressing the Print Head Release
Lever and adjusting the labels against the Label
Edge Guide next to the Print Head Release
Lever.