Text Objects: Inserting Symbols; Text Objects: Inserting And Generating Serial Numbers - Avery Dennison Label Printer User Manual

Text Objects: Inserting Symbols

To insert a symbol, click inside a text object. Position the cursor where the symbol is to be
inserted and select Insert > Symbol. The Symbol dialog box appears. Select a Font from the
drop-down list box. All available characters for the selected font appear. To magnify a
character, click it once. To insert a symbol, select a symbol and click Insert. The character is
inserted at the cursor position. Click Close to exit the dialog box.

Text Objects: Inserting and Generating Serial Numbers

Use this tool to automatically create and print a consecutive series of numbers or letters.
A serial number field can only be inserted on the Master tab. To insert a serial number field,
click on the Master tab to make it active. Click inside a text object and position the cursor
where the information is to be inserted. If a text object is not selected, a text object will
automatically be created when the serial number field is inserted.
Select Insert > Serial Number or click
on the Vertical toolbar. The Serial
Number dialog box appears.
• Serial Number Type - Select either a
numeric or alphabetic serial number.
• Serial Number Range - Type a Start
Value, End Value and Increment
number. Counting is always from the start
value to the end value. Specify whether or
not the serial number is to be displayed
with leading zeros by checking or
unchecking the relevant check box. If
Leading Zeros is enabled, enter the total
Number Of spaces for the serial number.
• Current Serial Number Value - When
this option is enabled, the serial number of
the last label printed is saved. The next
time the document is opened, the serial
number continues to print from where it left off with the last print run. If the option is
disabled, the serial number will always begin with the Start Value. To reset a serial number
to the Start Value, select the serial number field in the text object. Select Format > Field
Parameters > Serial Number. Click Reset and OK.
®
86 Avery Personal Label Printer